 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| HSMx-C265 Surface Mount Chip LEDs Data Sheet Description The HSMx-C265 is a reverse mountable chip-type LED for lighting the non-component side of a PCB board. In this reverse mounting configuration, this LED is designed to emit light through a small cut-out hole in the PC board. The HSMx-C265 is available in four colors. The small size, narrow footprint, and low profile make this series of LEDs excellent for backlighting, status indication, and front panel illumination application. Features * Reverse mountable * Undiffused optics * Small 3.4 x 1.25 mm footprint * Operating temperature range of -30C to +85C * Compatible with IR solder reflow * Four colors available: red, orange, yellow, and green * Available in 8 mm tape on 7" (178 mm) diameter reels Applications * Keypad backlighting * Symbol backlighting * LCD backlighting * Status indication Device Selection Guide Part Number HSMS-C265 HSMD-C265 HSMY-C265 HSMG-C265 HSMH-C265 Color High Efficiency Red Orange Yellow Green AlGaAs Red Parts Per Reel 3000 3000 3000 3000 3000 Package Dimensions 3.4 (0.134) LED DIE CATHODE MARK 1.25 (0.049) R 0.25 (0.01) 0.4 (0.016) WHITE SOLDER MASK (THICKNESS = 0.15 (0.006) 0.4 (0.016) GREEN CATHODE MARK (CUM SOLDER MASK) UNDIFFUSED EPOXY 1.1 (0.043) PC BOARD 1.2 (0.047) POLARITY 1.1 (0.043) 0.3 (0.012) 0.25 (0.01) 0.50 0.15 (0.020 0.006) 0.50 0.15 (0.020 0.006) SOLDERING TERMINAL Notes: NOTE: 1. ALL DIMENSIONS IN MILLIMETERS (INCHES). 1. All dimensions in millimeters (inches). 2. TOLERANCE IS 0.1 2. Tolerance is 0.1 mm ( 0.004 in.) unless otherwise mm UNLIESS OTHERWISE SPECIFIED. specified. 3. Polarity of HSMH-C265 will be the opposite of what is shown on above drawing. HSMx-C260 Pkg Dimen Absolute Maximum Ratings TA = 25C Parameter DC Forward Current[1] Peak Pulsing Current[2] Power Dissipation Reverse Voltage (IR = 100 A) Led Junction Temperature Operating Temperature Range Storage Temperature Range Soldering Temperature HSMD/G/S/Y-C265 HSMH-C265 Units mA mA mW V C C C 25 25 100 100 65 65 5 5 95 95 -30 to +85 -30 to +85 -40 to +85 -40 to +85 See IR soldering profile (Figure 6) Notes: 1. Derate linearly as shown in Figure 4. 2. Pulse condition of 1/10 duty and 0.1 msec. width. 2 Electrical Characteristics TA = 25C Part Number HSMS-C265 HSMD-C265 HSMY-C265 HSMG-C265 HSMH-C265 Forward Voltage VF (Volts) @ IF = 20 mA Typ. Max. 2.1 2.2 2.1 2.2 1.8 2.6 2.6 2.6 2.6 2.6 Reverse Breakdown VR (Volts) @ IR = 100 A Min. 5 5 5 5 5 Capacitance C (pF), VF = 0, f = 1 MHz Typ.[1] 8 6 7 6 18 Thermal Resistance RJ-PIN (C/W) Typ. 250 250 250 250 300 Optical Characteristics TA = 25C Part Number HSMS-C265 HSMD-C265 HSMY-C265 HSMG-C265 HSMH-C265 Color HER Orange Yellow Green AlGaAs Luminous Intensity Iv (mcd) @ 20 mA[1] Min. Typ. 2.5 2.5 2.5 4.0 6.3 10.0 8.0 8.0 15.0 17.0 Peak Wavelength peak (nm) Typ. 630 605 589 570 660 Dominant Wavelength d (nm)[2] Typ. 626 604 586 572 639 Viewing Angle 21/2 Degrees[3] Typ. 150 150 150 150 150 Notes: 1. The luminous intensity, Iv, is measured at the peak of the spatial radiation pattern which may not be aligned with the mechanical axis of the lamp package. 2. The dominant wavelength, d, is derived from the CIE Chromatically Diagram and represent the perceived color of the device. 3. 1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity. 1.0 GREEN RELATIVE INTENSITY YELLOW 0.5 ORANGE HER 0 500 550 600 650 700 750 WAVELENGTH - nm Figure 1. Relative intensity vs. wavelength. HSMx-C260 fig 1 3 100 IF - FORWARD CURRENT - mA IF MAX. - MAXIMUM FORWARD CURRENT - mA 1.6 LUMINOUS INTENSITY (NORMALIZED AT 20 mA) 35 30 25 20 15 10 5 0 0 20 40 60 80 100 RJ-A = 600C/W RJ-A = 800C/W 10 HER GREEN 1.2 0.8 1 YELLOW 0.1 ORANGE 1.5 1.7 1.9 2.1 2.3 VF - FORWARD VOLTAGE - V 0.4 0 0 10 20 30 40 IF - FORWARD CURRENT - mA TA - AMBIENT TEMPERATURE - C Figure 2. Forward current vs. forward voltage. HSMX-C190 fig 2 Figure 3. Luminous intensity vs. forward current. HSMx-C260 fig 3 Figure 4. Maximum forward current vs. ambient temperature. HSMx-C260 fig 4 1.00 0.90 RELATIVE INTENSITY - % 0.80 0.70 0.60 0.50 0.40 0.30 0.20 0.10 0 -90 -80 -70 -60 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 ANGLE Figure 5. Relative intensity vs. angle. HSMx-C260 fig 5 2.2 (0.087) DIA. PCB HOLE 10 SEC. MAX. TEMPERATURE 230C MAX. 140-160C 4C/SEC. MAX. OVER 2 MIN. TIME 4C/SEC. MAX. 3C/SEC. MAX. 1.4 (0.055) 2.3 (0.091) 1.4 (0.055) 1.25 (0.049) Figure 6. Recommended reflow soldering profile. Figure 7. Recommended soldering pad pattern. HSMx-C260 fig 7 HSMx-C260 fig 6 Note: 1. All dimensions in millimeters (inches). 4 USER FEED DIRECTION CATHODE SIDE PRINTED LABEL Figure 8. Reeling orientation. 8.0 1.0 (0.315 0.039) O 20.20 MIN. (O 0.795 MIN.) O 13.1 0.5 (O 0.516 0.020) 10.50 1.0 (0.413 0.039) 3.0 0.5 (0.118 0.020) 178.40 1.00 (7.024 0.039) 59.60 1.00 (2.346 0.039) 4.0 0.5 (0.157 0.020) 6 PS 5.0 0.5 (0.197 0.020) Figure 9. Reel Dimensions. HSMx-C260 Reel Dimensions Note: 1. All dimensions in millimeters (inches). 4.00 (0.157) 1.50 (0.059) CATHODE DIM. C (SEE TABLE 1) 0.20 0.05 (0.008 0.002) 1.75 (0.069) 3.50 0.05 (0.138 0.002) DIM. A (SEE TABLE 1) 8.00 0.30 (0.315 0.012) CARRIER TAPE COVER TAPE DIM. B (SEE TABLE 1) 2.00 0.05 (0.079 0.002) USER FEED DIRECTION 4.00 (0.157) TABLE 1 DIMENSIONS IN MILLIMETERS (INCHES) PART NUMBER HSMx-C265 SERIES DIM. A DIM. B DIM. C 0.10 (0.004) 0.10 (0.004) 0.10 (0.004) 3.70 (0.146) 1.45 (0.057) 1.30 (0.051) Figure 10. Tape dimensions. HSMx-C260 fig 10 END START Convective IR Reflow Soldering For more information on IR reflow soldering, refer to Application Note 1060, Surface Mounting SMT LED Indicator Components. THERE SHALL BE A MINIMUM OF 160 mm (6.3 INCH) OF EMPTY COMPONENT POCKETS SEALED WITH COVER TAPE. MOUNTED WITH COMPONENTS THERE SHALL BE A MINIMUM OF 160 mm (6.3 INCH) OF EMPTY COMPONENT POCKETS SEALED WITH COVER TAPE. MINIMUM OF 230 mm (9.05 INCH) MAY CONSIST OF CARRIER AND/OR COVER TAPE. Figure 11. Tape leader and trailer dimensions. HSMx-C260 fig 11 Notes: 1. All dimensions in millimeters (inches). 2. Tolerance is 0.1 mm ( 0.004 in.) unless otherwise specified. Storage Condition: 5 to 30C at 60% RH max. Baking is required under the condition: a) the blue silica gell indicator becoming white/transparent color b) the pack has been open for more than 1 week Baking recommended condition: 60 5C for 20 hours. 6 6 For product information and a complete list of distributors, please go to our website: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies, Pte. in the United States and other countries. Data subject to change. Copyright (c) 2006 Avago Technologies Pte. All rights reserved. Obsoletes 5980-1655E 5980-2435E November 27, 2007 7 |
Price & Availability of HSMS-C265
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |